Framing, Additions, Building New and old ConstructionFraming construction new and old home construction in a wood homes consisting of beams, sill plates, joists, sub decking, interior, exterior walls, ceiling joists, rafters and sheathing. Wood materials are generally 2 inch thickness and 8, 10, or 12 inch depth. The size depends upon the loading, length of span, spacing between joists, and the species and grade of lumber used. Cross bridging between wood joists has often been used in house construction, but solid bridging provides a more rigid base for partitions located above joist spaces. Click here to view a sample home remodel project estimate. Click here to view a sample home remodel project material estimate. All estimate Price Quotes will depend on the size and detailed information that is provided by the customer for each room or project. Have a written home estimate project of labor, material and other components for all phases of construction remodeling, renovation and disaster reconstruction. We include a cover sheet, line item detail, summary, recap by room, and recap by category, sketch drawings and a complete material list with all estimates. We are an outsource provider for any size residential and light commercial project.Services Available • Blueprint plans take-off services for residential projects. • Remodeling, renovation, refurbishment and light commercial. • Writing for owners and contractors. • Written estimates for new and old construction. • Plan scopes for construction and owners. • Each professional estimate is written with Xactware software. • Estimates are written for remodeling, renovation, repair, restoration and disaster reconstruction.
Sub-decking is used for a working platform and base for finish flooring. This may be applied either diagonally in older homes or at right angles to the joists. Plywood should be installed with the grain direction of the outer plies at right angles to the joists and be staggered so that end joints in adjacent panels break over different joists. Interior and exterior includes primarily the vertical studs and horizontal members’ soleplates, top plates, and window and door headers of exterior and interior partition that support ceilings, upper level, and the roof. The partition also serves as a nailing base for covering materials. The partitions members used in conventional construction are generally nominal 2 by 4 inch studs spaced 16 inches on center. Headers over doors or windows in load bearing partition consist of doubled 2 by 10 inch and deeper members, depending on span of the opening.
As with first level construction, two general types of partitions are commonly used platform construction and balloon construction. The platform method is more often used because of its simplicity. Balloon framing is generally used where stucco or masonry is the exterior covering material in two story houses. The partitions are erected above the first level which extends to all edges of the building. A combination of platform construction for the first level sidewalls and full length studs for ends extending to the rafters of the gable ends is commonly used in single story houses. One common method of framing is the horizontal assembly on the sub level or tilt up of exterior or interior sections.
The partition studs in platform construction are erected above the sub-level which extends to all edges of the building. The combination of the first level sidewalls and full length studs for end extending to the rafters of the gable ends is commonly used in single story houses. One common method of framing is the horizontal assembly on the sub-floor or tilt up of wall sections.
Ceiling joists are used to support ceiling finishes. They often act as joists for second and attic decking and as ties between exterior partition and interior partitions. Since ceiling joists also serve as tension members to resist the thrust of the rafters of pitched roofs, they must be securely nailed to the plate at outer and inner walls. Framing, Additions, Building New and old Construction |
